Services

A Re-Roof or in better Terms Roof Replacement. is a complete tear off of your existing roof system down to the sheathing wood deck. Any rotted wood would be completely replaced with a new wood board as needed. The Sheathing deck is usually bought up to code Renailing the deck. Then a Brand new roof system is installed on the deck. New flashing, drip edges, valleys, lead stacks, and roof vents are installed. 

Clay tiles are produced by baking molded clay. The most commonly used clay color is the Terra-Cotta. Because clay tiles are made from a natural earth derived material, they are environmentally friendly and easily recycled.

Concrete tiles are made of mixture of sand, cement and water, which are molded under heat and high pressure.They are resistant to hail, wind, and fire, making them a very safe roofing material when properly installed.

Advantages of Meal Roof

• Special coatings process resists dirt and environmental aging.
• Lightweight: less than 1/3 the weight of asphalt.
• Metal Roofing systems won't rot, crack, split, break or burn.
• Environmentally correct - made from recycled material and are 100% recyclable.
• Increase home/building Value.
• Energy effiencent.

Three-tab asphalt shingles have one shingle tab size and shape that consists of three separate tabs that are 12 inches wide. They are coated with asphalt to shed water. 

Architectural shingles are characterized as dimensional or laminate and come in varying sizes and shapes.

Flat roofing is not actually flat; it has a very low slope—between 1/4 to 1/2 inch per foot—so that it drains water.

A flat roof is designed as a continuous, or monolithic, surface that can hold some standing water for a limited time.

There are many different roof systems for Flat Roof. In South Florida, a typical residential flat roof is either a Hot Mop System or a Self Adhered System. Installing insulation is optional.

Short for thermoplastic polyolefin, TPO is a single-ply roofing membrane that offers excellent performance at a cost-effective price. Heat-welded seams provide superior strength.

TPO's long-term heat, UV, and natural fungal resistance, plus flexibility without need for plasticizers also make TPO a reliable low-slope roofing system.

Waterproofing protects structures against water infiltration which can cause expensive and irreversible damage. It is mostly invisible after construction is completed. 

Balconies, Elevator Pits, Parking Garages and much more is exposed to intense fluctuations in moisture levels and temperatures, all contributing to its deterioration.

Elastomeric roof coating is a liquid coating that's applied to low-slope roofs. They include metal, concrete and membranous roofing. It's applied like regular paint, but it does a lot more than anything mere paint can do. 

One of the causes of urban heat island is that your roofing systems can absorb heat from direct sunlight. An effective solution is white roofing material, which reflects sunlight and solar heat. The less heat absorbed through the roof, the less need of indoor cooling.

Even a small leak can cause major damage to your home. Fortunately, roof repairs are much more affordable than a full roof replacement.

Common Signs of Roofing Problems

• Broken or Missing Shingles/Tiles 
• Cracked Flashing / Valleys
• Cracked Roof Vents
• Improperly Installed Skylights 
• Condensation in your attic
• Excessive Shingle granules in your gutters or floors
• Water Stains

A roof recovery is  the process of installing an additional roof covering over a prepared existing roof covering without removing the existing roof covering.